your wishlist is empty



Applicable as BUS cable in dry, damp and wet rooms, even outdoors, if protected from direct sunlight, but not in the ground. As a BUS cable for the European Installation Bus (EIB) approved. For fixed installations on, in and under plaster; also in pipes and ducts.

Technical attributes
bus type ASI-Bus
Conductor material Cu, tinned
Conductor type very flexible
Conductor category 6
Conductor standard IEC 60228
Core colours brown/blue
Outer sheath EPDM
Outer sheath colour yellow or black
Insulation EPDM
Temperature range min., mobile operation -25 °C
Temperature range max., mobile operation +85 °C
Temperature range min., fixed installation -40 °C
Temperature range max., fixed installation +85 °C
Temperature at conductor max. +90 °C
Conductor resistance 1,5 mm² -> 13,7 ohm/km; 2,5 mm² -> 8,21 ohm/km
Nominal voltage Uo/U Uo/U 32 V (yellow outer sheath); Uo/U 48 V (black outer sheath)
Test voltage 2000 V AC
RoHS-compliant yes
Minimum bending radius 9 x cable-Ø


● flame-retardant IEC/EN 60332-1-2

● halgen-free IEC 60754-2

Product table

PNr. product name remember
 Weight ca. [kg]Cu-weight [per_km]Outer-Ø ca. [mm]Outer sheath colour 
02405001ASI Bus 2 x 1,5 ye EPDM remember
02405002ASI Bus 2 x 1,5 bk EPDM remember
02405007ASI Bus 2 x 2,5 ye EPDM remember
02405008ASI Bus 2 x 2,5 bk EPDM remember
default message